Products
HPLC Instruments
Single Pump Specifications
Ever pursuing flow stability.
Single Pump
Pulseless flow
Reciprocating noise is minimized by using specially designed dual plungers connected in series and adopting the newly developed internal pressure damper and check valves. The discharge volume is 18.84 µL/rev. Pulseless flow is achieved by controlling the high density pulse step motor (flow rate range: 1-3000µL/min). Precise gradient curves are drawn even at a low flow rate.
High-precision control
The internal pressure damper makes a pulseless flow (flow rate range: 1-3000µL/min). Accurate gradient curves are attained by the pump system designed for semi-micro flows.
Easy operation by keys on the control panel
Besides PC-controlling, the pump can be operated via the ten-key control pad. Up to 50 steps can be set for flow programming (1-µL/min increments).
Metal-free pump head
The pump heads are made of polyetheretherketone (PEEK) resin. The use of PEEK avoids contamination of metal impurities, which may influence some physiologically active samples.
Software
The pump can be fully controlled by several different types of PC-based software (S-MC, OpenLAB EZChrom, Xcalibur, and Analyst).
Automatic purge
Solvent replacement has been greatly improved by employing an automatic purge function, which was not included in the previous model (3001).
Specifications
Product No.
3101
Product Name
Single Pump
Pumping System
Dual plunger pump
Drive System
Pulse motor driven constant flow rate / constant pressure system
Flow Rate Range
0 to 3000 µL/min
Flow Setting
By system control software / By numerical ten keys
Flow Rate Accuracy
Within ± 2% or ± 2 µL/min (Under specified conditions)
Flow Rate Precision
Within ±0.3% (Under specified conditions)
Flow Program
Time-flow rate, programmable in 50 steps
Flow rate: 0 to 3000 µL/min
Time: 0 to 999.99 min
Pressure Range
0 to 35 MPa (0.1MPa increments)
Pressure Limiter
Low pressure and High pressure
Flow Path Composition
PEEK, ruby, sapphire, polyethylene, Teflon, and Diflon
Output Signal
Start signal, error signal, pressure waveform signal (analog), program start signal, and system controller connector
Control
Ten-key control pad / Control software
Temperature
10 to 35°C
Power
AC 100V±10%, 50/60Hz, 50W
Dimensions
120 (W) x 230 (H) x 479 (D) mm
Weight
Approx. 12 kg
Page top